Products Affected: CBT-3T6-5R, CBV-2U4-3T, CBV-2U4-3T-N, CBX-8R8, CBX-8R8-H, CBT-4T4-2U1R
This is an incremental build from the previous version that fixes reported issues and adds enhancements. Also, support has been added for new FBTi-7T7-1U1R controller.
Zone Temperature Input has been added to the FusionAir module
Additional parameters have been added to the FusionAir module.
Products Affected: FBXi-X256, FBVi-2U4-4T-IMP, FBVi-2U4-4T-SI, FBVi-2U4-4T, FBVi-2U4-4T-FA-IMP, FBVi-2U4-4T-FA-SI, CBXi-8R8, CBXi-8R8-H
The initial release of CBT firmware v9.0.0 under some circumstances caused a reboot loop problem on the CBT-3T6-5R. Firmware v9.0.1 resolves this issue.
Summary The CBXi range of controller firmware has been updated from 8.1.2 to 8.1.3 to fix an issue with downloading the SiteGuide program from CXproᴴᴰ failed when the controller already had an existing SiteGuide program.
The CBT, CBV and CBX range of controller firmware has been updated to update BACnet operation and product rebranding, and to address a number of issues. Products Affected: CBT-4T4-4T, CBT-3T6-5R, CBT-4T4-2U1R, CBV-2U4-3T, CBV-2U4-3T-N, CBX-8R8, CBX-8R8H 07-13-
Summary The CBXi range of controller firmware has been updated from 8.1.0 to 8.1.2. This build is a maintenance release that resolves several issues relating to the operation of the Optimiser module. See Bulletin for complete details.
Summary The CBT, CBV and CBX range of controller firmware has been updated from 8.1.0 to 8.1.1. This build is a maintenance release that resolves several issues including Set Points resetting to zero following a restart/power cycle.